Hydraulic vehicle uses 4mm steel plate, no breakpoint welding strength is reliable;, hydraulic vehicle integral casting cylinder, The falling speed of the oil cylinder is not affected by the heavy load; Using the inlet seal ring, The piston rod is chrome-plated; The overflow valve inside the hydraulic vehicle provides overload protection, Effectively reduce maintenance costs; High-quality centripetal roller bearings are used at the rotary shaft connection, Flexible and not shaking; Integrated cast wheel frame, And equipped with front and rear steering wheels, Protect the fitted wheel from impact and extend the life of the wheel; Conpered arc fork design, Fast and convenient access to the tray; The movement part of the hydraulic vehicle is equipped with a wear-resistant guide ring, Absorption of partial load to extend the service life; The handle dial fork is fitted with rubber pads, Greatly extend the service life.
matters need attention：
1. Don't overload it;
2. Whether the ground conditions are allowed to use;
3. Correct loading of the goods;
4. Please wear safety shoes and gloves when operation;
5. Please do a thorough operation inspection before each use;
6. Assembly the machine with the correct lifting technology;
7. Do not ignore the potential dangers that may exist during the operation.
keep in good repair
Proper maintenance of hydraulic vehicles will extend the service life of the truck, mainly check oil, eliminate air and lubrication.Check the oil surface best once every six months.The new injected oil to the rubber container should be 5mm below the liquid level height, and the goods must be in the lowest position when the oil is added.To replace the seal, theair may enter the hydraulic system, place the lever in the lowest position, and swing the handle a dozen times.Lubrbe the moving parts with either motor oil or lubricant.In addition, pay attention to daily inspection and maintenance. The inspection of hydraulic vehicles can reduce wear as far as possible, and special attention should be paid to the control of wheels, axles, forks, lifting and lowering.Whenever the work is done, the fork should be empty and lowered to the lowest position.
Choose
Goods in handling can be divided into horizontal handling and vertical handling, porters with compact car body, flexible use, convenient, environmental protection has become a necessary tool to meet the horizontal handling of materials.Generally speaking, hydraulic vehicles can be divided into manual hydraulic vehicles,semi-electric hydraulic vehicles and fully electric hydraulic vehicles. Manual hydraulic vehicle Manual hydraulic vehicle has a large carrying capacity, is one of the tools used for short distance handling of heavy objects, is by the ability to drive the hydraulic system to achieve the lifting and fall of goods, and pulled by manpower to complete the handling operation.
All electric hydraulic vehicles
The principle of cargo rise and fall of all-electric hydraulic vehicles is the same as that of semi-electric hydraulic vehicles. The difference is that all operations of all-electric hydraulic vehicles use power system, without human operation, which is a time-saving handling tool.
Hydraulic vehicles are widely used in logistics, warehouses, shopping malls, workshops, schools, airports, etc.
