Slitting machine in the cutting process can be roughly divided into three methods: flat knife cutting, round knife cutting, extrusion cutting. Flat cutting is the same as a razor, in which a single or double-sided blade is fixed to the mounting bracket and the knife is lowered while the data is running.
The cutting of slitter cutter is for the data from the cutting direction of the upper and lower plates of the knife. This cutting is more convenient for the knife. The upper round knife and the footwall knife can adjust the direction directly according to the cutting width requirements. The defect is that the data is very simple in the phenomenon of tangent drift, so the accuracy is not high, and it is generally not needed now.
There are two ways to cut the slitting machine: one is slitting. When the data is running in the knife groove roller, the data is cut vertically and horizontally, and the cutting knife falls in the groove roller. At the moment, the learning data in the knife groove roller has a certain Angle, which is not easy to control the phenomenon of time drift. The other is suspended slitting is when the data is passed between the two rollers, the razor falls and the data can be cut longitudinally.
We are all in the use of slitting machine operation, we can according to the slitting machine slitting mode, the correct operation of the slitting machine is what we need.
