The Automatic Card Slitting &Collating Machine equipment is used to cut all kinds of cards, such as some playing cards, game cards we play, or cards for children to learn. These all need to use the slitter equipment to cut, usually printing several cards, and then cutting them into small ones. Let's talk about the function of the slip shaft on the equipment from the Zhejiang Slitter equipment manufacturer.
The slip shaft is used to cut and roll low tension products. The slip ring on the slip shaft will roll according to the tension of each roll of material. The slip ring on each roll of material will slip with the axis to achieve the effect of balanced and stable tension. Finally, the end face of the rolled product is neat and the tension is moderate, It solves the shortcomings of the inflatable shaft (the end face is not neat, some of the winding materials are loose, and some are too tight and deformed). At the same time, the slip bearing is large, the maximum axis can reach 60, and the minimum is 50. Generally, for those with a bearing weight of more than 200 kg, I think it is necessary to properly assemble a receiving frame, which is convenient for workers to operate while protecting the slip shaft from deformation. One person can operate an Automatic Card Slitting &Collating Machine
The function of double sheet controller: when Feida transports two or more sheets of paper forward at a time, the detection wheel rotates, the proximity switch cannot detect the wheel, the electric bell rings the alarm, and the equipment stops running. The human-machine interface displays two. (Note: the bearing is in contact with the checkered roller, and the distance between the detection wheel and the bearing should be greater than the thickness of one piece of paper and less than two pieces of thickness)
