01. Keep the storage warehouse dry and control humidity
If conditions permit, add a dehumidifier or start a small fan to increase convection. When necessary, we can put some desiccant and so on, so that the moist air can be very good to the craft paper damage.
02. Regularly check whether the bottom card is damaged, and prevent paper from contacting the ground directly
The height of the card should be more than ten centimeters. The card board uses the whole plate, not the strip board. Can reduce the direct contact surface of craft paper and moist air greatly so, achieve moisture-proof effect thereby.
03. The film should be enclosed, not only one layer to do formal work
When enclosing film, the clamping plate is also synchronized. Whether the enclosing film is standardized and strict, and whether it can minimize the contact between water vapor and kraft paper plays a crucial role. If it is not used up after opening, it should be sealed with a sealing film in time to reduce the contact time between the paper and the moist air.
04 paper placement, cards should be left between a large gap, easy air circulation
After the day is clear, you can open the Windows, speed up the indoor air circulation, the warehouse moisture discharge.
The most important thing is to prepare for a rainy day. As long as we finish the precautionary measures, strictly according to the process operation, is completely can avoid kraft paper damp this kind of incident.
