Servo systems and frequency converters play a significant role in the wave of domestication of industrial automation. They are connected to the performance breakthroughs of upstream semiconductor devices on one end and the intelligent upgrades of downstream manufacturing scenarios on the other. They are not only the core execution ends for achieving high-precision control and flexible speed regulation of equipment, but also the core engines driving the entire industrial control industry chain to break away from external dependence and leap towards high-end. In the past, domestic core power devices were long dependent on imports, which not only pushed up the manufacturing cost of complete machine products, but also put the security of the supply chain and the stability of delivery in a completely passive situation. Nowadays, domestic power device manufacturers and servo and inverter whole machine enterprises have initiated in-depth collaboration. From the joint definition of initial demands and the joint development of core technologies to the long-term working condition verification in complex industrial sites in the later stage, they have gradually solved the industry pain points of "each fighting on its own" in the past. The industrial collaboration model of "domestic whole machines + domestic components" is on the way.
01 Dual-track parallel operation: Market Resonance of Servo and Frequency Conversion
As the most crucial motion control component in industrial automation, the servo system is essentially an automatic control system that operates based on closed-loop feedback logic. If you give it a target command, it can precisely follow the position, speed or torque of the controlled object throughout the entire process without any obvious deviation. Its core mission is to amplify, transform and precisely control the input power, ultimately enabling the torque, speed and position control output by the drive device to be flexible, adjustable and precisely controllable. The structure of this system is not complicated and consists of three core components: the servo driver, the servo motor and the encoder. Among them, the servo driver is the "brain" of the entire system. After receiving external control instructions, it dynamically adjusts the motor current to complete closed-loop control in three dimensions: position, speed, and torque respectively. The servo motor is the "hands and feet" of the system, responsible for the final motion output. Currently, the industry generally adopts permanent magnet synchronous motors to achieve higher power density and operational energy efficiency. The encoder is the "eye" of the system, providing real-time feedback on the actual operating position of the motor to the driver. The mainstream products are divided into incremental encoders and absolute value encoders. In recent years, driven by the dual forces of the upgrading of intelligent manufacturing and the explosion of emerging industries, the servo system market has not only achieved a significant recovery, but also, under the impetus of the rapid increase in the domestic production rate and the continuous breakthroughs in local technologies, has driven a deep structural reconstruction of the value distribution of the entire industrial chain. According to the "2026 China General Servo Product Market White Paper" released by Ge Wu Zhi Sheng, the market size of China's general servo products has strongly rebounded to 22.96 billion yuan in 2025. The overall market share of domestic brands has exceeded 60% for the first time, achieving a leapfrog growth compared to the level of less than 50% five years ago. In the past, Japanese brands, relying on their first-mover advantage, long occupied half of the domestic servo market. However, this long-standing pattern has now completely reversed. Their market share has plummeted from over 50% before 2020 to approximately 26% currently, and their industry influence is continuously weakening. As a key hub in the drive layer of industrial automation, the localization process of frequency converters has also achieved remarkable results. Especially in the widely used low-voltage frequency converter field, domestic brands have gradually taken the lead in the market through technological innovation and achieved high-quality local supply. According to the "2026 China Low-Voltage Frequency Converter Market White Paper" released by Ge Wu Zhi Sheng, the market size of low-voltage frequency converters in China is approximately 29.27 billion yuan in 2025, maintaining a leading position in the industrial control sub-sector in terms of market volume. In layman's terms, a low-voltage frequency converter is a type of AC motor drive device with a voltage level lower than 690V. It precisely controls the motor speed by adjusting the frequency and voltage of the power supply. Looking back ten years ago, the domestic inverter market was dominated by foreign brands. International giants like ABB and Siemens, relying on their long-term technological advantages, built extremely high competitive barriers, leaving almost no room for domestic enterprises to gain a foothold. Nowadays, the industry has witnessed a historic turning point. By 2025, the market share of domestic brands has climbed to 46%, achieving a leapfrog growth. This marks that Chinese manufacturers have successfully broken the long-term monopoly of foreign capital and reshaped the competitive landscape of the domestic low-voltage frequency converter market. The simultaneous rise of the two major fields of servo and frequency converter has directly driven the continuous expansion of the demand for upstream power devices. This demand expansion driven by the two core industrial control components is not a scattered increase brought about by the growth of a single track, but a systematic industrial resonance that is transmitted from the downstream complete machine end to the upstream semiconductor link in reverse after the entire industrial automation localization enters the deep water zone.
02 Local Enterprises: From single-point supply to strategic Synergy
Thanks to the systematic resonance formed by the deep binding of upstream and downstream, the market role of domestic power device manufacturers is undergoing a profound transformation. In the past, their role was that of a "supplier", that is, to provide components in accordance with the specification requirements of the complete machine enterprises, and price was the core competitive dimension. Nowadays, leading enterprises are upgrading to "strategic partners", deeply participating in the product definition and R&D of complete machine enterprises. As a leading domestic player, Inovance Technology has maintained its position as the top player in the domestic servo market with a market share of approximately 22%, thanks to its complete product matrix, stable performance, and localized service advantages. It has surpassed traditional Japanese giants such as Panasonic and Yaskawa Electric, becoming a core benchmark in the domestic servo market. Delta Electronics, headquartered in Taiwan, China, ranks in the second tier with a market share of approximately 9%. Its servo product line has formed a complete gradient from high-end multi-axis (W3) to basic types (E3/E3C). Xinjie Electric, which originated from traditional manufacturing, followed closely with a domestic market share of approximately 18%, driving the growth of its servo business through the "PLC+" solution. The collaboration between Sida Semiconductor and Inovance Technology is also a typical example of this transformation. In January 2026, Star Semiconductor was once again honored with the title of "Strategic Supplier" by Inovance Technology. It is reported that Star Semiconductor has been deeply involved in the product research and development of Inovance Technology, providing it with comprehensive semiconductor device and system solutions, especially the custom-developed IGBT and SiC module solutions, which have significantly improved the energy efficiency ratio and system reliability, helping Inovance maintain its technological leadership in industrial control and new energy fields. This "jointly defined" cooperation model means that power device manufacturers are no longer passively accepting orders but participate in the optimization design of the overall machine performance from the chip level. The comprehensive coverage of the product matrix serves as the technical foundation for seizing supporting opportunities. Silan Microelectronics is advancing along three main lines: silicon-based IGBTs and MOSFETs, third-generation semiconductors (SiC and GaN), and 12-inch high-end analog. At present, the company's industrial-grade MCUS have been maturely applied in scenarios such as industrial frequency conversion, and have formed an integrated product matrix of "MCU+ power module + driver IC" with its IGBT/SiC power modules and gate driver ics. Through chip-level collaborative optimization, the system's energy efficiency and reliability have been effectively enhanced, and the R&D costs for customers have been reduced. In addition, Hongwei Technology has been deeply engaged in core industrial control scenarios such as frequency converters and servo drives for many years. Relying on its profound technological accumulation and full industrial chain layout capabilities, it has currently established a platform-based product system of "chips + modules", and successfully expanded its business territory into high-growth fields such as new energy power generation, new energy vehicles, and data centers. A dual-driven pattern has been formed, featuring stable cash flow business and high-potential growth business. From "selling devices" to "jointly defining", and from "single-point supply" to "system solutions", the role of domestic power device manufacturers has shifted from traditional back-end supply to front-end collaboration, turning the collaboration of "domestic complete machines + domestic devices" from a slogan into a feasible industrial practice.
03 The Path to Advancement: Overcoming the Three Hurdles of Industrial Upgrading
While remarkable development achievements have been made, the shortcomings in the maturity of the industry cannot be ignored. At present, the generational technological gap in high-end industrial control power devices still exists, and the penetration rate of domestic products in the high-end market has always been difficult to break through. Although domestic power device manufacturers have basically achieved comprehensive replacement in the mid-to-low-end industrial control device market, and their product performance and delivery capabilities can fully meet the demands of mainstream scenarios, in core categories such as high-end IGBT modules, high-precision SiC devices, and high-end IPM modules required for high-end servo systems and high-voltage high-power frequency converters, There is still a generational gap between us and the international leading giants. Products of foreign brands still maintain obvious advantages in core indicators such as long-term operational stability, full life cycle lifespan, high-frequency dynamic performance, and consistency in batch production, while the core components of domestic high-end industrial control equipment are still highly dependent on imports to this day. Meanwhile, there is still considerable room for improvement in the mass production stability and wafer yield of domestic third-generation semiconductor devices. For the time being, it is still difficult to be widely adapted to the strict requirements of extreme working conditions in high-end industrial control scenarios. The absence of the high-end market has become the biggest shortcoming for domestic power device manufacturers to break into the upstream of the industry at present. In addition, domestic brands still face a high-cost threshold that is difficult to overcome quickly in the face of new wide bandgap devices like SiC. The progress of large-scale penetration has always lagged behind market expectations. Although third-generation semiconductor devices such as SiC and GaN have outstanding advantages in terms of high voltage resistance, low loss, and high-frequency response, the preparation of upstream substrate raw materials is difficult and the entire production process is complex. The final mass production cost is much higher than that of mature traditional silicon-based power devices. At present, the overall cost performance is still difficult to meet the large-scale popularization needs of mid-to-low-end general industrial control equipment. At present, SiC devices have only been implemented in small batches in a few leading projects of high-end servo and high-end frequency converters. Constrained by the rigid cost pressure at the machine end, the mainstream product selection of the vast majority of mid-to-low-end industrial control manufacturers still mainly relies on mature silicon-based devices. The large-scale implementation speed of new power devices is far lower than the general expectations of the industry previously. This cost barrier has become the core obstacle currently restricting the industrial control industry from upgrading to higher energy efficiency. More importantly, the all-round low-price competition is also constantly squeezing the space for industrial research and development and upgrading. During the process of increasing the domestic production rate of industrial control devices, the number of domestic servo and frequency converter manufacturers has grown rapidly, and market competition has become increasingly fierce. The intensity of price competition has spread from the low-end red ocean market to mid-to-high-end scenarios. The cost pressure on the entire machine end has been passed on to the upstream, driving the domestic power device industry into a low-price competition and continuously narrowing the profit margins of enterprises. Due to the meager profits being unable to support the high R&D investment required for high-end devices, some enterprises have fallen into a path dependence of "emphasizing scale but neglecting R&D". This not only slows down the overall pace of technological upgrading but also becomes a key bottleneck restricting the domestic power device industry from achieving high-quality and high-end breakthroughs.
04 Conclusion
Looking back from the current industrial node, the opportunities and challenges in the industrial control semiconductor field have always gone hand in hand. The acceleration of the localization of servo and frequency converters is not merely a simple battle for market share, but a crucial leap for China's industrial automation industry chain from "breakthroughs in complete machines" to "full chain autonomy". Domestic power device manufacturers have long completed the role transition from "standard suppliers" who passively accept orders to "strategic partners" deeply bound with downstream complete machines, and have achieved comprehensive replacement in the mid-to-low-end industrial control device market. However, core issues such as the fact that the generation gap of high-end technologies has not been fully bridged, the high cost of new wide bandgap devices, and the continuous low-price competition across the industry that has been depleting research and development space remain the hurdles that the industry urgently needs to overcome. Looking ahead, the second half of the industrial control semiconductor industry will no longer be a simple competition for market share, but rather a reshaping of its position in the global value chain. When domestic enterprises can define product standards through technological innovation and reconstruct the industrial landscape through ecological collaboration, China's industrial control semiconductors will truly transform from "followers" to "leaders".





