Automatic waste cleaning machine is the punch and die cutting indentation machine upgrade products. Compared with punch and press die-cutting indentation machine, the operation of the machine is completely controlled by computer, with a high degree of automation, thus ensuring the high precision and efficiency of production. In order to improve the quality of their products and enhance the competitiveness of enterprises, many enterprises gradually introduce more and more internal hole cleaning machine in the production. However, due to the high precision of automatic die-cutting machine, maintenance requirements are also higher than semi-automatic and manual product requirements. Therefore, many operators in the operation of automatic die-cutting machine do not know the maintenance knowledge, resulting in the damage of the machine, not only affected the production efficiency, but also brought financial losses to the company. So, how should we maintain the automatic belt clean waste die-cutting machine?
1. The dust
The most important point of the maintenance of automatic waste cleaning machine is dustproof. Because in the process of processing paper products, the work of the automatic waste cleaner will cause paper chips and fiber dust to fly around. If the larger paper scraps fall into the transmission system of the automatic die-cutting machine, such as chain transmission parts, die-cutting movement platform and rotating movement parts. It may cause the machine to lock up or other serious failure.
Even if the waste chip does not enter the transmission part of the automatic die-cutting machine, but the debris flying is still likely to block the photoelectric sensor, resulting in the machine can not work normally. Therefore, in the dustproof maintenance of automatic die-cutting machine, we should do one to prevent two clear, that is, to prevent large scraps falling into the machine transmission device, to clean the dust on the transmission device and scrub the photoelectric sensor every day.
2. The lubrication
Automatic waste cleaning machine as a high degree of automation machine, working efficiency is fast. General automatic waste cleaning machine at work can reach the processing speed of 6000 pieces per hour. Thus it can be seen that the wear of such a fast working speed on the machine parts is undoubtedly very large, which requires us to do a good job in the lubrication and oil change of the machine. The lubrication of the waste cleaning machine should be lubricated at different frequencies according to the different parts of the machine.
The daily lubrication parts are: side gauge, gear, bearing, pressure bar, flyhead part of flyup parts, direction joint, main chain. The daily maintenance requirement of automatic lubrication device is to maintain the oil level and oil number. The components to be lubricated weekly are: front gauge adjusting device, spring, CAM, side gauge chain, other parts of flyup parts, SS type waste cleaning device, paper feeding CAM, tooth row, paper receiving part and paper straightening part, adjusting chain. Lubricated components are: clutch, secondary block and other transmission components.
In short, the automatic waste cleaning machine is a good assistant in the production of die cutting process. But no matter how good a machine is, it needs maintenance. In addition to the author said above to timely cleaning and lubrication of the machine, but also according to the actual situation of the machine timely adjustment. For example, in order to prevent mechanical failure, it is best to overhaul the machine regularly.
