The rapid development of waste cleaning machine in the mainland is due to the infinite demand of shopping malls and the introduction of advanced technology from abroad. The popular back is the admission of pneumatic tools, but also the pursuit of new technology, more is the productivity of the waste cleaning machine must.
The paper conveying and waste cleaning part of the automatic waste cleaner is composed of cardboard transmission by the transmission shaft through the imported PU round belt. In the transmission process, two vibration bars are used to make the cardboard vibrate in the transmission belt with high amplitude and then reach the waste cleaning function.
The waste cleaning machine not only has excellent performance and the energy consumption required is low, but also greatly improves the working efficiency under the conditions of saving time and effort. The main power of the waste cleaner is pneumatic motor, which has high safety. In order to improve the power and reduce the waste removal cycle, a pneumatic waste cleaner, its power selection of power motor, strong power but low power consumption, its safety is also obtained European standards to see, not only that, this pneumatic waste cleaner has a long service life but also easy to replace.
Automatic waste cleaning machine, is to replace manual waste cleaning (dismantling), improve the printing power of the machine. Automatic waste cleaning machine is selected with imported screw guide rail to ensure the accuracy of goods, humanized programming controller and man-machine interface, machine fault active monitoring, so that the fault cleaning operation is more convenient.
Carefully implement the warehouse management "eight prevention" safety work, namely: fire prevention, waterproof, damp prevention, moth-prevention, electric prevention, anti-theft, sunscreen, collapse prevention.
Moth prevention: keep the warehouse clean, carefully check all walls, find holes, cracks to take appropriate ways to repair, prevent rats, moths damage to the goods.
Power protection: warehouse goods should be stored away from the power supply, the warehouse wires and switches should be irregularly checked and maintained, the main power supply should be turned off after work, so as not to damage by electric fire.
Fire protection: Fireworks are strictly prohibited in the warehouse, and ignition is not allowed in the warehouse. Smoking should be concentrated in the designated area, and cigarette butts should be extinguished after smoking.
Anti-theft: all the Windows in the warehouse need to install iron net, work of the measure timely close the doors and Windows, all the goods in and out of the warehouse need to have a single according to, so as not to warehouse goods lost.
Sunscreen: When the goods are stored near the window in the warehouse, the curtains need to be lowered to isolate the sunlight. The curtains that are not completely isolated should be isolated from the sunlight by appropriate means such as cardboard to avoid the deterioration of the goods by sunlight.
Collapsion-proof: when stacking the goods in the warehouse, the goods should be "small at the top and big at the bottom", "light at the top and heavy at the bottom" and "orderly and orderly", which should be carried out according to the standard height to avoid the damage caused by the collapse of the goods.
Waterproof: the warehouse goods should be stored away from the water source, after work should be timely closed doors and Windows, to avoid rain wet infiltration of goods.
Prevention of damp: when goods need to be stored in damp prone areas of the warehouse, they need to be separated from the floor by card board, cardboard and other appropriate ways, and the goods must be packed with plastic bags to prevent damage caused by damp.





